PHI Electric Furnace “ELEPOT”

We introduce a portable electric furnace that you can install everywhere. ELEPOT is a space-saving size that has been pursued to allow you to move and carry the furnace everywhere by adapting light ceramic fiber for thermal insulation material. This lightweight furnace has been achieved by installing an air layer between the outer wall and the furnace. This Electric Furnace aims to cater low cost and increase work speed for multiple industries that require:

• Quenching, tempering and annealing of steel
• Melting and sintering of metal
• Heating for shrink-fit and processing
• Solution heat treatment, stress relief treatment, aging heat treatment
• other heat treatments (up to 1150⁰C

Features:

1. Low Price
2. Installed anywhere & light in weight
3. Energy-saving Electric Furnace
4. Cylindrical in shape, with optimum heat up and easly loading/unloading.
5. User friendly operation
6. Built-in safety feature to prevent overheating included (Except Elepot “LU Model”)

Built-in Features of Electric Furnace – Elepot

Important note: The voltage in the Power Requirement can be adjusted according to the requirement of the customer’s power supply such as Thailand’s power requirement.

ELEPOT Additional Features and Options:

• Upper Lid Hole processing for releasing gas or smoke, which is used effectively together with “in-furnace protection case”.
• In-Furnace Protection Case is a stainless-steel cover. The case is cylindrical that covers the whole furnace from the edge part of ELEPOT electric furnace to protect heater ceramic part from smoke/gas from work piece or scale, and metal spill during melting.
• Double-Decker; If the inside of the furnace is not enough in the standard model, the height inside the furnace can be doubled by connecting the heater units and stacking them in two levels. This method is suitable for long objects. Configuration up to 3 levels can be manufactured.
• Melting Pot and Pedestal; this set is suitable for melting when used in ELEPOT electric furnace. The sizes of the set can be adjust accordingly.
• Change in Voltage, voltages of the furnace can be adjusted according the requirement of the customer’s power supply.
• Nitrogen Atmosphere Specification; the main body could be complemented with piping for injecting nitrogen gas and a flow meter into the furnace. High-temperature heat treatment easily caused oxidation and decarbonization that cause insufficient hardness. This could be avoided by filling the furnace with nitrogen gas and reducing oxygen.
• Inner Cover; By installing an inner cover in the furnace when injecting nitrogen gas, a highly sealed space can be created. As a result, the inside of the furnace is double-sealed, which can be expected to reduce oxidation and decarburization. Because of its design with the openable top lid, it is possible to take out only the work without taking out the entire inner cover after the processing. (Available only when using the “nitrogen atmosphere” option)
• Bottom Reinforcement (30 kg/50 kg). By reinforcing the bottom, the processing weight can be changed (remodeled) to “30kg or less” or “50kg or less”, and heavy objects can be processed. (Applicable to LH model only)
• Processing by Hanging; Installation of a heat-resistant round bar on the frame of the furnace so that the work can be hung. It is suitable for the situations such as “in an environment where the work cannot be put on the floor”, “to reduce the warpage and distortion of the work”, and “to process of thin plates and blades”.
• Program Temperature Controller; Normal specifications do not allow multiple temperatures to be set. The “program temperature controller” allows you to set the temperature gradient up to “1 pat-tern / 9 steps”, expanding the range of use. You can raise the temperature through stages or slowly increase the temperature. (Natural cooling is the way to lower the temperature.)
• Safety Timer Under normal specifications, a buzzer sounds when the set temperature is reached and the holding time has elapsed, notifying that processing has been completed. At that time, the heater keeps ON and maintains the temperature. When using the “Safety Timer”, the heater is automatically turned off after the holding time has elapsed instead of sounding the buzzer. It can also be used safe-ly as a measure against forgetting to turn off the power. It is also effective as a consideration for the neighbourhood by the buzzer sound at night work.