We are specialized in:
- Removal of metallurgical impurities
- Reduction of metal content in the dross
- Modification with sodium and strontium
- Grain refinement
- Refining of aluminum

 



PRODUCTS LIGHT METAL

   Aluminum is the most used metal to produce light and highly stressed castings. Due to its good castability and low specific mass, the automotive sector in particular offers many fields of application. Furthermore, it is ideal for food industry because of its low corrosion tendency.

   All applications require specific metallurgic treatments including cleaning of the metal, grain refinement as well as modification. Only a specific treatment of the melt results in properties such as high strength, high extension values and secured anodisability. The treatment of the dross is also very important, as there is a huge saving potential of recovered metal and furnace and crucible walls need special maintenance.

Pressure Die Casting

+ Hypoeutectic AlSi alloys G-AlSi8Cu3, G-AlSi10Mg, G-AlSi7Mg G-AlSi12 und G-AlZn10Si8
For cleaning and treatment of the dross
ARSAL 2120
ARSAL 2125
ARSAL 2135
PROBAT-FLUSS AL 224

+ Hypereutectic AlSi alloys G-AlSi12, G-AlSi18CuNiMg, G-AlSi17CuNiMg
For cleaning
PROBAT-FLUSS AL 2126
PROBAT-FLUSS AL 3125
PROBAT-FLUSS AL 2140
For grain refining of primary silicon

PROBAT-FLUSS VLP 200

Continuous Casting

+ Al-, AlMg, AlMgSi, AlCuMg, AlZnMg
For cleaning and treatment of the dross
ARSAL 2120
ARSAL 2125
ARSAL 2135
For sodium free dross treatment
PROBAT-FLUSS AL 2126
PROBAT-FLUSS AL 3125
PROBAT-FLUSS AL 2140
For grain refining of aluminum alloys
MIKROSAL AL T 100
MIKROSAL AL T 200
For release agent
CILLOLIN AL 225

Sand Casting

+ Hypoeutectic AlSi alloys G-AlSi8Cu3, G-AlSi10Mg, G-AlSi7Mg G-AlSi12 and G-AlZn10Si8
For cleaning
ARSAL 2120
ARSAL 2125
PROBAT-FLUSS AL 224
For modification
EUTEKTAL T201
PROBAT-FLUSS MONOTAB NS
EUTEKTAL 375
For grain refining
MIKROSAL AL T 100
MIKROSAL AL 350
For improvement of the feeding behavior
PROBAT-FLUSS BEGASER T 200
PROBAT-FLUSS LUNKERPULVER 200
PROBAT-FLUSS MIKRO 100

+ Near- and hypereutectic AlSi alloys G-AlSi12, G-AlSi18CuNiMg, G-AlSi17CuNiMg
For cleaning and skimming purposes
PROBAT-FLUSS AL 2126
PROBAT-FLUSS AL 3125
For grain refining of primary silicon
PROBAT-FLUSS VLP 200
For improvement of the feeding behaviour
PROBAT-FLUSS BEGASER T 200
PROBAT-FLUSS LUNKERPULVER 200
PROBAT-FLUSS MIKRO 100

+ Low Si alloys ; G-AlMg3, G-AlMg3Si, G-AlCu4Ti
For cleaning and skimming purposes
PROBAT-FLUSS 2126
PROBAT-FLUSS AL 3125
For grain refining
MIKROSAL AL T 100
MIKROSAL AL T 200
For improvement of the feeding behaviour
PROBAT-FLUSS LUNKERPULVER 200

 

 Gravity Die Casting

+ Hypoeutectic AlSi alloys G-AlSi8Cu3, G-AlSi10Mg, G-AlSi7Mg G-AlSi12 and G-AlZn10Si8
For cleaning
ARSAL 2120
ARSAL 2125
PROBAT-FLUSS AL 224
For modification
EUTEKTAL T201
PROBAT-FLUSS MONOTAB NS
EUTEKTAL 375
For grain refining
MIKROSAL AL T 100
MIKROSAL AL 350
For improvement of the feeding behaviour
PROBAT-FLUSS BEGASER T 200
PROBAT-FLUSS LUNKERPULVER 200
PROBAT-FLUSS MIKRO 100

+ Near- and hypereutectic AlSi alloys
For cleaning
PROBAT-FLUSS AL 2126
PROBAT-FLUSS AL 3125
For grain refining of primary silicon
PROBAT-FLUSS VLP 200
For improvement of the feeding behaviour
PROBAT-FLUSS BEGASER T 200
PROBAT-FLUSS LUNKERPULVER 200
PROBAT-FLUSS MIKRO 100


+ Low Si alloys; G-AlMg3, G-AlMg3Si, G-AlCu4Ti
For cleaning
PROBAT-FLUSS AL 2126
PROBAT-FLUSS AL 3125
For improvement of the feeding behaviour
PROBAT-FLUSS LUNKERPULVER 200
PROBAT-FLUSS MIKRO 100


Product details

ARSAL 2120

Cleansing and skimming agent for all hypoeutectic and eutectic aluminum alloys such as e. g.: G-AlSi10Mg, G-AlSi7Mg, G-AlSi8Cu3, G-AlSi12 and G-AlZn10Si8.

Quality characteristics:

  • removes oxides from the melt by flotation and reduces the hydrogen content
  • produces a fine, powdery and low-metal dross
  • works in all types of furnaces and crucibles
  • permits the easy removal of adherences
  • Resulted in very low smoke and odor emission

Appearance: Blue powder mix

Odor: Odorless

Reaction temperature: From approximately 700°C (higher temperatures accelerate the reaction)

 

ARSAL 2125

Highly compacted cleansing and skimming granules for all hypoeutectic and eutectic aluminum, wrought and casting alloys such as e. g.: G-AlSi10Mg, G-AlSi7Mg, G-AlSi8Cu3, G-AlSi12 and G-AlZn10Si8

ARSAL 2125

 

Quality characteristics:

  • removes oxides from the melt by flotation and reduces the hydrogen content
  • forms mixing phases with the oxides and adheres to the oxide by energetically low surface tension
  • prevents the formation of corundum and its adherences
  • produces a fine, powdery and low-metal dross
  • works in all types of furnaces and crucibles
  • permits the easy removal of adherences
  • Resulted in very low smoke and odor emission

Appearance: Blue granules / flakes

Odor: Odorless

Reaction temperature: From approximately 700°C (higher temperatures accelerate the reaction)

 

PROBAT-FLUSS AL 2126

 

Sodium-free cleansing and skimming agent potassium based, for all low-silicon and hypereutectic aluminium alloys such as e. g.: G-AlMg3, G-AlCu4Ti, G-AlSi17Cu4Ti and G-AlSi18CuNiMg as well as aluminium wrought alloys

Quality characteristics:

  • removes oxides from the melt by flotation and reduces the hydrogen content
  • produces a fine, powdery and low-metal dross
  • works in all types of furnaces and crucibles as it is free from any sodium
  • permits the easy removal of adherences
  • Resulted in very low smoke and odor emission
  • suitable for the automatic dosing with an impeller system

Appearance: White powder mix

Odor: Odorless

Reaction temperature: From approximately 700°C (higher temperatures accelerate the reaction)

 

PROBAT-FLUSS BEGASER T 200

Tablets for the effective gassing of aluminum melts
suitable for all casting alloys in the sand casting, gravity die casting and low-pressure casting


Quality characteristics:

  • prevents the formation of shrinkage holes
  • avoids the formation of draws
  • reduces the rejects
  • increases the share of hydrogen in the melt
  • increases the density index

Appearance: Whitish tablets

Odor: Odorless

Reaction temperature: From approximately 700°C (higher temperature accelerate the reaction)

  PRODUCTS GRAVITY DIE CASTING

 

Coatings for gravity die casting separate the liquid metal from the mold and avoid thereby adhesions. At the same time they manage the heat transmission and influence positively the flowing behavior during the filling of the gravity die. According to the requirements they also have a certain sliding property or help to achieve a particularly smooth surface.

 Thus, each coating has its specific features for all requirements: to hold or to conduct heat, to create smooth surfaces or to provide for a good flow ability. Special coatings do protect ascension pipes or thermocouples or produce clean and smooth surfaces in magnesium casting.

 

+ smooth surface, styling faces

For smooth surface, styling faces
CILLOLIN AL 285

For medium heat transport

CILLOLIN AL 2812

For high heat transport

CILLOLIN AL 223

 

+ coarse surface, contour surfaces

For low heat transport
CILLOLIN AL 285 G
For medium heat transport
CILLOLIN AL 2812 G
For high heat transport
CILLOLIN AL 223 G

 

+ Very coarse surface, demanding casting symmetry

For low heat transport

CILLOLIN AL 285 GN

For medium heat transport

CILLOLIN AL 3500 G

For high heat transport

CILLOLIN AL 223 GD

For very smooth casting face, low thermal conductivity

CILLOLIN AL 286

For ascension pipes, tools, protectice pipes

PYRONOL

For gravity dies and gate stones in vertical continuous casting

CILLOLIN AL 225

For sliding properties (pinholes)

CILLOLIN AL 160

For ceramic runners (alcohol-based)

CILLOLIN AL 500

For sand moulds for magnesium casting

CILLOLIN MG 785

PROBAT-FLUSS BEGASER T 200

Product details

CILLOLIN AL 286

CILLOLIN AL 286 is an isolating gravity die coating with improved sedimentation characteristics.

Quality characteristics:

  • low heat conductivity
  • reduces the downtime caused by cleaning and recoating
  • increases the productivity
  • produces a uniform surface structure on the casting part and prevents cold laps
  • prevents sedimentation from occurring too rapidly by means of a thixotropic agent
  • ensures excellent adhesion, especially regarding movable parts of the die
  • facilitates the removal of completed casting parts from the die
  • particularly for smooth surfaces

Appearance: White, pasty

Odor: Neutral

Application: Gravity die temperature at least 150°C up to 300°C